User Manual
PZ271E, valid for N-331
KSch, 1/18/2021
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 4 / 30
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
Other Applicable Documents
Product
Document
E-712.xAN digital controller
PZ195E user manual
PZ233E commands manual
Downloading Manuals
INFORMATION
If a manual is missing or problems occur with downloading:
Contact our customer service department (p. 21).
1.
Open the website www.pi.ws.
2.
Search the website for the product number (e.g., E-712).
3.
Click the corresponding product to open the product detail page.
4.
Click
Downloads
.
The manuals are shown under Documentation.
5.
Click the desired manual and fill out the inquiry form.
The download link will then be sent to the email address entered.
Safety
Intended Use
The N-331 PICMAWalk drive is a laboratory device as defined by DIN EN 61010-1. It is intended
for indoor use and use in an environment that is free of dirt, oil, and lubricants.
Based on its design and realization the N-331 is intended for positioning, adjusting and shifting
loads on one axis at various velocities.
The N-331 is a drive for applications in automation or handling technology. The drive is
not
intended for applications in areas in which a failure would present severe risks to human beings
or the environment. The drive is not intended for continuous operation.
Some models of the drive are equipped with optical, incremental sensors. Some models are
compatible for vacuum applications to 10
-9
hPa.
The intended use of the drive is only possible when installed and in conjunction with a suitable
electronics (p. 10). The electronics is not included in the scope of delivery of the drive.
The electronics must provide the required operating voltages. To ensure proper performance of
the servo-control system, the electronics must also be able to read out and process the signals
from the sensors.