8
www.phywe.com, © All rights reserved
12620-09 and 12620-10 / 2715
Mode
This setting option is available for the following Cobra4 Sen-
sor-Units:
-
Cobra4 Sensor-Unit Timer / Counter (12651-00)
The following operating modes of the Timer / Counter can be
selected (Fig. 17):
Measurement of shading times
Measurement of runtimes from the start until the
crossing of the light barrier
Start-stop when crossing the light barrier
Counter mode
Frequency measurement
Wind measurement (with sensor 12124-00)
Start
This setting option is available for the following Cobra4 Sen-
sor-Units:
-
Cobra4 Sensor-Unit Timer / Counter (12651-00)
It is used to select the type of start, i.e. a manual start with
,
an automatic start with a rising signal
or with a falling
signal
, or with the external triggers
or
(Fig. 18).
Gate time
This setting option is available for the following Cobra4 Sen-
sor-Units:
-
Cobra4 Sensor-Unit Timer / Counter (12651-00)
5.4.3
Datalogger/Setup (2.1)
The following changes are possible:
-
Selection of the single-value measurement mode by way
of a switch. This ensures that only one value will be re-
corded when a measurement is started. (2.1.1)
-
Selection of the time interval between the individual
measurements and of the unit of measurement (2.1.2
and 2.1.3).
-
Toggling between time and the measurement value
number as an X-data set (2.1.4).
5.4.4
Datalogger/Files (2.2)
In the "Datalogger" menu, already existing measurements
can be displayed and deleted (Fig. 20).
Fig. 19: Display of the submenu "Datalogger" for the Cobra4
Mobile-Link 2
Fig. 18: Display of the submenu "Setup" for the Cobra4 Sensor-
Unit Timer / Counter (12651-00)
Fig. 20: Display of the submenu "Datalogger > Files" for the
Cobra4 Mobile-Link 2
Files
Menu
OK
Setup
Menu
Mode
Timer
Start
Gate time
1 s
Menu > Sensor
Setup
Menu
Single Values
Logging every
50
Measure Unit
ms
X-Axis data
Time
Menu > Datalogger
Menu > Datalogger
13010101.MLI
13010501.MLI
13010502.MLI
13010503.MLI
13010504.MLI
Date:
01/01/2013
Sensor:
Acceleration
X-axis data
Time
