phytron
21
MA 1273-A007 EN
6 Installation
6.1 Mechanical Installation
phytron always delivers the
phy
MOTION
TM
completely assembled in order to make sure
you can start with the installation and the wiring right way.
Further Manual
Detailed information on this subject is in a supporting manual:
“
phy
MOTION
TM
Modular Multi-axis Controller for Stepper Motors”
The POWM is delivered as a single module card if sent after service or repair or when an
expansion card was ordered.
In case you receive an individually packed POWM as an expansion module or after repair
or service unpack the module in ESD protected area only.
CAUTION – Possible damage by ESD!
The modules of the
phy
MOTION
TM
consist of sensitive electronic
components that can be destroyed by electrostatic discharge voltages.
- Always store and transport single modules in ESD protective
packaging.
- Always handle the components in compliance with the ESD
protection measures.
- No liability is accepted for any consequences resulting from
improper handling or non-ESD-friendly packaging.
Before you install or replace modules, make sure that the
phy
MOTION
TM
is unplugged.
