phytron
29
MA 1311-A001 EN
8 Service
In case of a service contract, please proceed as follows:
First, try to identify the technical problem. Feel free to ask our support team for help. We
are pleased to assist you.
Removal of a module:
- Switch off the
phyMOTION
™’s supply voltage
- Disconnect the supply voltage
- Loosen the screw on top and the screw on the bottom of the m
odule’s front plate
- Pull the card carefully by the handle.
- If you want to use the
phyMOTION
™ after removing a module, the gap has to be
sealed with a blanking plate before power supply is reconnected and switched on.
- To send a module to Phytron use ESD packaging only.
