phytron
11
MA 1261-A006 EN
4.3 Features
Features
Power supply
5 V
DC
The module is powered internally via phytron’s backplane on
the rear side.
Current consumption
(max.)
180 mA
70 mA (RS interface)
120 mA (ProfiNet)
Cable length Reset input
shielded: 100 m max.
Diagnostic
2 Status LEDs on the front panel for diagnostic
Operating modes of the
controller
•
Remote
•
Local: Stand-alone device with sequence program
Refresh rate
2 ms
Interfaces
Communication via
backplane bus
Proprietary phytron bus
Bus connection host
Selectable host interface: RS 232, RS 485, RS 422,
Ethernet, ProfiBus, ProfiNet
Digital input
Reset (24 V
DC
electrically isolated)
Communication and programming
Programming
via phytron‘s programming environment
phy
LOGIC
TM
Toolbox
Communication
Master slave communication with all modules and interfaces
of the
phy
MOTION
TM
.
Memory
Up to 4 MB
Flash memory
10 000 write cycles under normal operating conditions
