phytron
47
MA 1235-A016 EN
The corresponding instruction for the other motor would be:
Y+200
.
8. An icon in the menu bar
Transmission/Operation
opens the following dialog box which
enables you to drive the motor per mouse click.
1.
9. Click on simply one of the buttons
Axis1– (X–)
to
Axis2+ (Y+)
. Dir means
clockwise, seen onto the motor axis from outside.
2. If the motor should move in the wrong direction, exchange the connecting leads of
one motor phase, e.g. A and B.
10. You can enter drive instructions for both axes into the window "Drive relative ... “
The or – before the entered number of steps defines the direction.
When you click on the button
Start
the instruction will be executed. Now the button
has the marking
! STOP !
in order to cancel the movement if required.
11. You can change the drive frequencies of both motors with two slider controls at the
bottom of the window ‘Frequency’.
12. You can initialize each axis with click on one of the buttons
Axis1 M0P–
or
Axis2 M0P+
. The initializing can be cancelled by
! STOP !
.
13. Another MiniLog-Comm window allows to test inputs and outputs.
