Manual MCC-2
MA 1235-A016 EN
12
1.6 Directives and Standards
CE Mark
With the declaration of conformity and the CE Mark on the
product the manufacturer certifies that the product complies
with the requirements of the relevant EC directives. The unit,
described here, can be used anywhere in the world.
EC Machine Directive
The drive system, described here, isn´t a machine in the sense
of the EC machine directive (2006/42/EC), but a component of
a machine for installation. They have no functional moving
parts. But they can be part of a machine or equipment.
The
conformity of the complete system in accordance with the
machine guideline is to be certified by the manufacturer with
the CE marking.
EC EMC Directive
The EC Directives on electromagnetic compatibility
(2014/30/EU) applies to products, which can cause
electromagnetic interference or whose operation can be
impaired by such interference.
The controller’s compliance with the EMC Directive cannot be
assessed until it has been installed into a machine or
installation. The instructions provided in “Installation” must be
complied with to guarantee that the MCC-2 is EMC compliant
when fitted in the machine or installation and before use of the
device is permitted.
Standards for safe
operation
EN 60204-1: 2007-6: Electrical equipment of machines,
degree of pollution 2 must be observed
EN 60529: 2014-09: IP Degree of protection
Standards for
observing the EMC
limit values
EN 61000-3-2: EMC
EN 61000-6-1, 3, 4: Emission standard
EN 61000-6-2:2005: EMC Immunity for industrial environments
Standards for
measuring methods of
observing EMC limit
values
EN 55011 class B: Noise field and voltage measuring
EN 61000-4-2...6,11: Emission standard test