background image

Manual DIOM01 

 
MA 1271-A003 EN

 

22

 

 

8  Warranty, Disclaimer and registered trademarks 

8.1 Disclaimer 

phytron GmbH has verified the contents of the manual to match with the hardware and 
software. However, errors and omissions are exempt and phytron GmbH assumes no 
responsibility for complete compliance. The information contained in this publication is 
reviewed regularly and any necessary corrections are included in subsequent editions. 

 

8.2 Warranty 

The

 phy

MOTION

TM

 modules are subject to 

legal warranty

. phytron will repair or exchange 

devices which show a failure due to defects in material or caused by the production 
process. This warranty does not include damage caused by the customer, for example, not 
intended use, unauthorized modifications, incorrect handling or wiring.  

 
 

8.3 Registered 

trademarks 

In this manual several trademarks are used which are no longer explicitly marked as 
trademarks within the text. The lack of these signs may not be used to draw the conclusion 
that these products are free from third parties' rights. For example, some product names 
used herein are: 

 

 

phy

MOTION

TM

 is a trademark of Phytron-Elektronik GmbH. 

 

phy

LOGIC

TM

 is a trademark of Phytron-Elektronik GmbH.  

  Microsoft is a registered trade mark and WINDOWS

®

 is a trade mark of the 

Microsoft Corporation in the USA and other countries. 

Summary of Contents for DIOM01.1
























Reviews: