Phytec phyFLEX-i.MX 6, Quick Start Instructions

Page: 5 / 85

Conventions, Abbreviations and Acronyms
Conventions, Abbreviations and Acronyms
The following is a list of the typographical conventions used in this book:
Conventions
The conventions used in this manual are as follows:

Signals that are preceded by an "n", "/", or “#”character (e.g.: nRD, /RD, or #RD), or
that have a dash on top of the signal name (e.g.: RD) are designated as active low
signals. That is, their active state is when they are driven low, or are driving low.

A "0" indicates a logic zero or low-level signal, while a "1" represents a logic one or
high-level signal.

The hex-numbers given for addresses of I
2
C devices always represent the 7 MSB of the
address byte. The correct value of the LSB which depends on the desired command
(read (1), or write (0)) must be added to get the complete address byte. E.g. given
address in this manual 0x41 => complete address byte = 0x83 to read from the device
and 0x82 to write to the device.

Tables which describe jumper settings show the default position in bold, blue text .

Text in blue italic indicates a hyperlink within, or external to the document. Click these
links to quickly jump to the applicable URL, part, chapter, table, or figure.

Text in bold italic indicates an interaction by the user, which is defined on the screen.

Text in
Consolas
indicates an input by the user, without a premade text or button to
click on.

Text in italic indicates proper names of development tools and corresponding controls
(windows, tabs, commands etc.) used within the development tool, no interaction
takes place.

White Text on black background shows the result of any user interaction (command,
program execution, etc.)

PHYTEC Messtechnik GmbH 2015 L-781e_7
iii