Phytec phyFLEX-i.MX 6, Quick Start Instructions

Page: 7 / 85

Introduction

PHYTEC Messtechnik GmbH 2015 L-781e_7
1
1 Introduction
In this QuickStart Instructions Manual you will find general information about the PHYTEC
phyFLEX-i.MX6-Kit and instructions how to start-up with the phyFLEX-i.MX6. You will learn
how to...

… use the prepared virtual machine hard disk image.

... connect to the target.

... handle with the Yocto Project and our Board Support Package to build your own images.

... working with Eclipse and Qt Creator .

... setup your own linux host system.
This first Chapter gives a short introduction about the PHYTEC phyFLEX-i.MX6-Kit and it's
Quickstart. Also you will find general requirements and information to successfully pass the
Quickstart.
1.1 Rapid Development Kit Documentation
This
Rapid Development Kit
(RDK) includes the following electronic documentation in the
virtual machine hard disk under /opt/ PHYTEC_Tools/Documentation.

The PHYTEC phyFLEX-i.MX6 Hardware Manual

Hardware schematics

The Yocto Reference Manual

The BSP Quickstart

Image Processing manuals

These Quickstart Instructions
1.2 Professional Support Packages Available
If you have any questions concerning installation and setup, you are welcome to contact
our support department.
For more in-depth questions, we offer a variety of custom-tailored packages with different
support options (e-mail, phone, direct contact to the developer) and different reaction
times.
Please contact our sales team to discuss the appropriate support option if professional
support beyond installation and setup is important for you. For more information please
refer to the following sources:
http://www.phytec.de
http://www.phytec.eu
support@phytec.de
Also more contact information can be found on page 2 .