Preface
This phyBOARD-WEGA-AM335x Board Hardware Manual describes the System on Module's design
and functions. Precise specifications for the TI AM335x processor can be found in the processor datasheet
and/or user’s manual.
In this hardware manual and in the schematics, active low signals are denoted by a "/" preceding the signal
name, for example: /RD. A "0" represents logic-zero or low-level signal, while a "1" represents a logic one
or high-level signal.
Declaration of Electro Magnetic Conformity of the phyBOARD-WEGA-AM335x
PHYTEC System on Modules (SOMs) are designed for installation in electrical appliances or, combined
with the PHYTEC Carrier Board, can be used as dedicated Evaluation Boards (for use as a test and
prototype platform for hardware/software development) in laboratory environments.
CAUTION:
PHYTEC products lacking protective enclosures are subject to damage by ESD and,
hence, may only be unpacked, handled or operated in environments in which
sufficient precautionary measures have been taken in respect to ESD-dangers. It is
also necessary that only appropriately trained personnel (such as electricians,
technicians and engineers) handle and/or operate these products. Moreover, PHYTEC
products should not be operated without protection circuitry if connections to the
product's pin header rows are longer than 3 mm.
PHYTEC products fulfil the norms of the European Union's Directive for Electro Magnetic Conformity
only in accordance to the descriptions and rules of usage indicated in this hardware manual (particularly in
respect to the pin header row connectors, power connector and serial interface to a host-PC).
Implementation of PHYTEC products into target devices, as well as user
modifications and extensions of PHYTEC products, is subject to renewed
establishment of conformity to, and certification of, Electro Magnetic Directives.
Users should ensure conformance following any modifications to the products as well
as implementation of the products into target systems.
The phyBOARD-WEGA-AM335x Board is one of a series of PHYTEC System on Modules that can be
populated with different controllers and, hence, offers various functions and configurations. PHYTEC
supports a variety of 8/16 and 32-bit controllers in two ways:
1. As the basis for Rapid Development Kits which serve as a reference and Evaluation platform.
2. As insert-ready, fully functional phyCORE OEM modules, which can be
Embedded directly into the user's peripheral hardware design.
© PHYTEC Embedded Pvt. Ltd. 2014 6
