Below table shows the signal mapping of the CAN1 signals at connector X65.
Pin
Signal
Pin
Signal
1
NC
2
GND
3
X_CANL
4
X_CANH
5
GND
6
NC
7
NC
8
NC
9
Shield
10
NC
Pin Assignment of CAN Connector X65
An adapter cable is included in the phyBOARD-Wega-Am335x Kit to facilitate the use of the CAN
interface. The following figure shows the signal mapping of the adapter.
5.9 Secure Digital Memory Card/ Multimedia Card (X11)
SD / MM Card interface at connector X11
he phyBOARD-Wega provides a standard micro SDHC card slot at X11 for connection to
SD/MMC interface cards. It allows easy and convenient connection to peripheral devices like SD- and
MMC cards. Power to the SD interface is supplied by inserting the appropriate card into the
SD/MMC connector, who features a card detection, a lock mechanism and a smooth extraction
function by Push-in /-out of card.
“The AM335x processor on the phyBAORD-Wega can boot from this interface.”
© PHYTEC Embedded Pvt. Ltd. 2014 20
