Phytec phyBOARD WEGA-AM335x, Hardware Manual

Page: 25 / 29

29 GND Ground
30 X_MMC2_DAT2 MMC data 2 K15
31 X_UART2_RX_GPIO3
_9 UART 2 receive data;
GPIO3_19 A17
32 X_MMC2_DAT3 MMC data 3 H16
33 X_UART2_TX_GPIO3
_10 UART 2 transmit data;
GPIO3_10 B17
34 GND Ground
35 X_UART3_RX_GPIO2
_18 UART 3 receive data;
GPIO2_18 C15
36 X_UART3_TX_GPIO2
_19 UART 3 transmit data;
GPIO2_19 C18
37 X_INTR1_GPIO0_20 Interrupt 1; GPIO0_20 D14
38 X_GPIO0_7 GPIO0_7 C18
39 X_AM335_EXT_WAK
EUP External wakeup C5
40 X_INT_RTCn Interrupt from the RTC
41 GND Ground
42 X_GPIO3_7 GPIO3_7;
Caution: [Also connected to power-
fail signal through R415!]
C14
43 nRESET_IN Push-button reset A10
44 X_GPIO3_8 GPIO 3_8;
Caution: [Also connected to
power-down circuit through R412!]
B14
45 X_AM335_NMIn AM335x non-maskable
interrupt B18
46 GND Ground
47 X_AIN4 Analog input 4 C8
48 X_AIN5 Analog input 5 B8
49 X_AIN6 Analog input 6 A8
50 X_AIN7 Analog input 7 C9
51 GND Ground
52 X_USB1_DRVVBUS USB 1 bus control output F15
53 X_USB1_ID USB 1 port identification P17
54 USB1_VBUS USB 1 bus voltage T18
55 X_USB1_CE USB 1 charger enable P18
56 GND Ground
57 X_PMIC_POWER_EN Enable Power Management
IC for AM335x
58
58 X_PB_POWER Power On for Power
Management IC for
AM335x
59 GND Ground
60 VCC5V_IN 5 V input supply voltage
© PHYTEC Embedded Pvt. Ltd. 2014 25