PHYTEC Messtechnik GmbH
© PHYTEC Messtechnik GmbH 2015
4 / 10
Support Hotline Europe:: +49 (6131) 9221-31 •
http://www.phytec.de
Support Hotline North America: 1-800-278-9913 •
http://www.phytec.com
The BSP shipped with the Kit includes already the software drivers for the supported phyCAM camera modules. The drivers are compatible with v4l2. Also
GStreamer scripts are included for the evaluation of the camera modules. If you need more then one camera interface or/and phyCAM-S+ support, please use the
phyFLEX-i.MX6 or phyCORE-i.MX6 Modul.
Note:
The phyBOARD-SEGIN features one CSI interface for phyCAM-P camera modules.
Please find more information about the camera support in the path: …\Documentation\...
The kit version KPB-02013-Alpha-L.A0 is shipped with an i.MX6 controller board which has camera support installed.
The Linux BSP for these kits does support the phyCAM-P camera series from PHYTEC.
ftp://ftp.phytec.de/pub/ImageProcessing/
The table below lists the options:
Hardware Configuration
Software Support
phyBOARD Kit
phyCAM-P at CSI
phyCAM-P at CSI
KPB-02013-Video-L01
yes (VM-010-BW-M12 is included)
yes
KPB-02013-Video-L02
Yes (phyCAM-P camera is selectable)
yes
KPB-02013-Alpha-
L.A0
yes
yes
NM = no mount