PHYTEC Messtechnik GmbH
© PHYTEC Messtechnik GmbH 2015
3 / 10
Support Hotline Europe:: +49 (6131) 9221-31 •
http://www.phytec.de
Support Hotline North America: 1-800-278-9913 •
http://www.phytec.com
On the PHYTEC or customer carrier boards can the interfaces are led out as phyCAM-P (or raw-parallel) see
figure 3 and/or phyCAM-S+ see figure 4. For more information to phyCAM-P/S+ see manual L-748.
figure 3: Block Diagram of an phyCAM-P solution with phyCORE-i.MX6UL (G2 / G3) and the go out on the phyBOARD-SEGIN-i.MX6UL - SBC
On the phyBOARD-Mira baseboard is only the CSI0/IPU#1 camera path (thru a serializer) go out as LVDS signal (see figure 4).
Here you can connect one of the different phyCAM-S(+) camera modules. See the phyCAM-P/-S manual L-748 for more information.
figure 4: Block Diagram of phyCAM-S(+) solution with phyCORE-i.MX6UL (G2 / G3) SBC