Phytec FireWire-CAM-011H, Manual

Page: 36 / 87

FireWire-CAM-011H/-012H
30
©
PHYTEC Messtechnik GmbH 2006 L-680e_1
2.5 Installation of the Demo Program
Use the PHYTEC demo program to test the functions of the camera.
You can find it on the CD enclosed with the camera.
You can download updates of the demo software on the PHYTEC
website.
Caution!
Check first to see if your computer meets the following system
requirements for operating the camera:
•
Pentium II, 300 MHz or higher and 1394-interface
•
Graphic card with 24 or 32-bit color depth
•
Windows 2000/SP2 or Windows XP
•
DirectX 8.1 or higher
Make sure that your computer is equipped with this software.
To install the driver software for the FireWire camera, proceed in the
following manner:
Caution!
The DirectX driver must be installed prior to installation of the driver
software for the FireWire camera. Otherwise not all driver functions
will be supported and/or the system may crash.
•
Connect the camera to your computer. To install the driver the
camera must be ready for operation. Follow the instructions in the
previous sections for this.
•
Insert the CD SO-221 in your computer’s CD-ROM drive.
•
The CD should start automatically, bringing up the title menu
shown in
Figure 23:
Title menu of the ‚Vis ion Tools‘ CD.
If the CD doesn’t start automatically: open the content folder of
the CD (from your desktop or using Windows Explorer) and
double click on
start.exe
.