Phytec FireWire-CAM-011H, Manual

Page: 12 / 87

FireWire-CAM-011H/-012H
6
©
PHYTEC Messtechnik GmbH 2006 L-680e_1
1.5 Important Notes
•
We hereby expressly note that, according to the product liability
law, we cannot be made responsible for damages caused by our
devices if they have been used or repaired inappropriately or if, in
case of a component replacement resp. system construction, other
parts than our original components or components approved by us
have been used, and especially if the operating instructions were
not correctly followed.
•
Handle the camera with care. Avoid hard shocks, concussions, etc.
The camera can be damaged by incorrect handling and wrong
storage.
•
Do not try to disassemble the camera. To avoid electric shocks, do
not remove neither screws nor the case. There are no components
in the camera that need user maintenance. Maintenance work may
only be carried out by qualified maintenance personnel.
•
Never use strong or abrasive detergents (e. g. alcohol, benzene or
turpentine) to clean the case of the camera. Wipe the case with a
soft cloth slithtly moistened with a neutral cleanser.
•
Never expose the camera to humidity, dust or dirt. This camera is
intended for indoor use only. Humidity can damage the camera and
cause the risk of electric shock.
•
Never point the camera towards the sun or very bright objects.
Otherwise this may lead to blooming and smear.
•
Keep the camera shut or mount a lens to avoid getting dust on the
CCD chip.