Phytec FireWire-CAM-011H Manual Download Page 21

Page: 21 / 87

First

Steps

Figure 9:

Insertion of the Card into the PCI Slot

•

Make sure that the card is straight and that no neighboring contacts
have been short circuited.

Attention!

Fix the card with a screw to the case for reasons of stability and to
ensure that the card has a safe bonding to the computer case

(see

Figure 9).

•

Close the computer’s housing.

•

Reconnect the mains supply.

•

Do not yet connect the camera with the FireWire socket of the
interface card.

•

Now start the computer. Windows XP / Windows 2000
automatically identifies the newly installed interface card. Since
the software drivers are already included in the operating system,
you usually will not need an installation CD.

Summary of Contents for FireWire-CAM-011H
























































































Search results

Summary of Contents for FireWire-CAM-011H

Reviews:

Related manuals for FireWire-CAM-011H

Brands by name

Popular brands

Phytec FireWire-CAM-011H, Manual

Search results

Summary of Contents for FireWire-CAM-011H

Reviews:

Related manuals for FireWire-CAM-011H

Brands by name

Popular brands