Phytec 1337.1, Hardware Manual

Page: 6 / 44

Display Adapter LCD-014-x / LCD-017-x
iv
©
PHYTEC Messtechnik GmbH 2011 L-758e_1
Abbreviation Definition
CB Carrier Board; used in reference to the PHYTEC
Development Kit Carrier Board.
EMI Electromagnetic Interference.
GPI General purpose input.
GPIO General purpose input and output.
GPO General purpose output.
J Solder jumper; these types of jumpers require solder
equipment to remove and place.
JP Solderless jumper; these types of jumpers can be
removed and placed by hand with no special tools.
PCB Printed circuit board.
PEB PHYTEC Extension Board
PDI PHYTEC Display Interface
SBC Single Board Computer; used in reference to
PHYTEC modules, such as phyCOREs, phyCARDS,
etc.
SMT Surface mount technology.
Sx User button Sx (e.g. S1, S2, etc.) used in reference to
the available user buttons, or DIP-Switches
Sx_y Switch y of DIP-Switch Sx; used in reference to the
DIP-Switches on the display adapter or Carrier
Board.
Table 1: Abbreviations and Acronyms used in this Manual
Note:
The BSPs delivered with PHYTEC Development Kits usually include
drivers and/or software for also controlling the PHYTEC Extension
Boards. Therefore programming close to hardware at register level is
not necessary in most cases. For this reason, this manual contains no
information relevant for software development. Please refer to BSP
documentation, chip datasheets and Linux sources if such information
is needed.