Phytec 1337.1, Hardware Manual

Page: 38 / 44

Display Adapter LCD-014-x / LCD-017-x
28
©
PHYTEC Messtechnik GmbH 2011 L-758e_1
Figure 9: Screwing
•
Put one screw through the wide opening of one plastic spacer
bolt and screw it through the first hole of baseboard and integral
hinge into the aluminum slat.
•
Do the same with a second screw and the second hole.
•
The remaining screws and plastic spacer bolts are to be
mounted on the opposite side of the baseboard. Use the nuts for
that as shown in Figure 9.
Figure 10: Rubber Plugs and Wires
•
Stuff the rubber plugs into the plastic spacer bolts.
•
Insert the ribbon cable into the ZIF socket and lock the socket.
•
Clip the connector of the second ribbon cable into the socket.