Phytec 1337.1, Hardware Manual

Page: 21 / 44

Connectors
©
PHYTEC Messtechnik GmbH 2011 L-758e_1
11
2.2 Display Connectivity (X2)
The display connector X2 is specific to the Primeview Displays used
by PHYTEC for these display adapters. In many cases other displays
need another pin assignment or even a completely different connector.
Pin # Signal name SL Description
1 LCD_3V3_S 3.3V +3V3 Logic Supply Voltage
2 LCD_3V3_S 3.3V +3V3 Logic Supply Voltage
3 GND Ground
4 GND Ground
5 DISP_LVDS_0- LVDS LVDS data channel 0 negative input
6 DISP LVDS LVDS data channel 0 positive input
7 GND Ground
8 DISP_LVDS_1- LVDS LVDS data channel 1 negative input
9 DISP LVDS LVDS data channel 1 positive input
10 GND Ground
11 DISP_LVDS_2- LVDS LVDS data channel 2 negative input
12 DISP LVDS LVDS data channel 2 positive input
13 GND Ground
14 DISP_LVDS_CLK- LVDS LVDS clock channel negative input
15 DISP_L LVDS LVDS clock channel positive input
16 GND Ground
17 DISP_LVDS_3- LVDS LVDS data channel 3 negative input
18 DISP LVDS LVDS data channel 3 positive input
19 GND Ground
20 GND Ground
21 GND
1
Ground
22 GND¹ Ground
Table 4: Display connector signal description
1
LCD-014 connects this to shield, but the connected display closes shield with GND