XL5 and XL RF
ENGLISH
62
Wheel Locks
The installation of wheel locks must be done after the installation and adjustment of
the propulsion wheels is completed. Be aware that the size of the propulsion wheels
will affect the position of wheel lock brackets. If the propulsion wheel installation has
not been completed, consult section
Installing propulsion wheels – Threaded axle
or
Installing propulsion wheels – Quick-Release axle
, depending on your type of axle.
WARNING
•
If your wheelchair is equipped with pneumatic tires, always make sure tire
pressure is adequate before adjusting wheel locks.
•
Ensure that all bolts and nuts are securely fastened when modifications
have been made.
•
It is important that wheel locks are readjusted if modifications have been
made to the propulsion wheels or if propulsion wheels appear worn
.
Standard Wheel Locks
Installing wheel locks
1. Position the wheel lock bracket on the side
frame rail.
2. Insert bolts
A
in the appropriate adjustment
holes.
3. Move wheel lock bracket forward or
backward in the adjustment slot until the
desired position is obtained.
4. With a 4mm Allen key and a 10mm wrench,
secure wheel lock bracket by tightening
screw
A
firmly.
Adjusting the brake force
1. With a 5mm Allen key, loosen bolt
B
.
2. Move wheel lock in the wheel lock bracket’s slot to
obtain the required brake force.
- To increase brake force, move wheel lock closer to
the propulsion wheel.
- To reduce brake force, move wheel lock further
from propulsion wheel.
