Owner’s Manual
ENGLISH
55
Installing the stroller bar (option)
1. With a precision knife, cut the rubber
grip covers at the ends of the handles.
2. With a 3mm Allen key, unfasten and
remove screws
D
.
3. Adjust the width of the stroller bar.
4. Fasten screws
D
.
5. Insert adapters
A
into the ends of the
back posts and fasten bolts
B
with a
5mm Allen key.
6. Insert the stroller bar into the ends of
the back post and insert the safety lock
C
to secure the stroller bar.
Adjusting the stroller bar angle
To adjust the stroller bar angle, simply press
both push buttons
E
simultaneously. This
will allow the stroller bar to move freely.
Once the desired angle is obtained, release
both push buttons
E
and the stroller bar will
automatically lock into place.
WARNING
Never lift or pull your wheelchair with the stroller bar. The stroller bar was
designed to push and steer the wheelchair only. Improper use may damage
or break the stroller bar and can result in injury.
R
e
vision 0
July
202
2
