12
“
A
SSEMBLE
I
NSTRUCTIONS
”
S
TEP
12
–
Pulse Sensor Wire and Mesh Backrest Assembly
a. Follow
FIG.3
to plug the
Pulse Sensor Wire 4
(147)
into the
connector A
located on the left side of the
Seat Carriage
Assembly (9)
NOTE:
Be careful not to pinch the
Pulse Sensor Wire 4 (147)
.
b.
NOTE:
Four
Screws, Round Head (1/4
’’x20mm)(105)
and Four
Lock Washer (M6)(91)
have been attached on the
back side of
the
Mesh Backrest (40).
c. Remove
four
Screws, Round Head (1/4
’’x20mm)(105)
and Four
Lock Washer (M6)(91)
from the back side of
the
Mesh Backrest (40).
d. Attach the
Mesh Backrest (40)
to the
Seat Frame (10)
with
four
Lock Washer
(M6)(91)
and
four
Screws, Round Head (1/4
’’x20mm)(105).
e. Gently insert
Mesh Backrest Cover (41)
into the recesses located on the back of the
Seat Frame (10)
as the right illustration shown.
f.
Finish the assembly. Make sure that all parts are tightened before you use the
equipment.
S
TEP
13
–
AC Adaptor
a. Connect the
Adaptor (148)
to the connector located on the front left
side of the
Main Frame (1).
b. Plug the
Adaptor (148)
into an electrical outlet to light up the
console.
Connector A
Summary of Contents for XT-800
Page 21: ...21 PRODUCT PARTS DRAWING A...
Page 22: ...22 PRODUCT PARTS DRAWING B...
Page 26: ...26...