13
“
O
PERATION
I
NSTRUCTIONS
”
H
OW TO ADJUST THE ADJUSTING ENDCAPS OF THE REAR STABILIZER
a. After placing the equipment in the intended location for use, check the
stability of the equipment
b. If it
’s the one of the
Adjusting Rear Stabilizer EndCaps (34)
on rear
end of the
Rear Stabilizer (4)
causes a slight rocking motion. To level
the equipment, turn one or both of the
Adjusting Rear Stabilizer
EndCaps (34)
in clockwise or counter-clockwise direction until the
equipment sets on the floor without rocking
H
OW TO ADJUST MAIN FRAME’S LEVELER
a. After placing the equipment in the intended location for use, make sure
the
Adjusting Rear Stabilizer EndCaps (34)
are well adjusted for
leveling the item
b. The purpose of the
Leveler (35)
is to support the middle
Main Frame
,
adjust
Leveler (35)
under the
Main Frame (1)
until it rests firmly on the
floor
c. To make the
Leveler (35)
rests firmly on the floor, turn the
Leveler (35)
counter-clockwise until the
Leveler (35)
touches the floor without
rocking
H
OW TO TOW THE ITEM SAFELY
Hold the
Rear Stabilizer (4)
up with two hands and tow the item
to the desired place carefully
Make sure the floor is level while towing the item
Summary of Contents for XT-800
Page 21: ...21 PRODUCT PARTS DRAWING A...
Page 22: ...22 PRODUCT PARTS DRAWING B...
Page 26: ...26...