2
—
Software Introduction
28 / 34
Below Temperature
Self-test Fail
DSP Fail - you can see which DSP chip has failed from the user interface (Web GUI, CLI,
etc.). There is a number 1 ~ 4 in the alarm message/description corresponding to the DSP chip
1 ~ chip 4
GBE Alarms
The UniPhyer LB-UA2348 provides the following alarms for GBE interfaces:
GBE1 SFP Loss of Signal
GBE2 SFP Loss of Signal
ADSL Alarms
The UniPhyer LB-UA2348 provides the following ADSL alarms:
LOS (Loss of Signal) -Near End/Far End
LOF (Loss of Frame) -Near End/Far End
LOM (Loss of Margin) -Near End/Far End
LCD (Loss of Cell Delineation) -Near End/Far End
NCD (No Cell Delineation) -Near End/Far End
LOPWR (Loss of Power) -Far End
COMMF: Unable to communicate with peer modem -Far End
NOPEER: No peer present – Far End
Summary of Contents for UniPhyer LB-UA2324
Page 2: ......
