Phybridge NVT PoLRE Series, User Manual

Page: 31 / 52

5 . A D M I N P A G E
A d m i n > S e t u p
27
P h y b r i d g e N V T P o L R E S w i t c h U s e r G u i d e
Import/Export Configuration
You can import or export the current switch configuration. This allows you to download the existing
configuration, make changes, and then upload the new configuration.
IMPORTANT
When editing the configuration file, the existing syntax must be strictly followed or you may lose access to
the switch. The file must be saved in Unix file format; using a program such as dos2unix/unix2dos or
+ to edit the file is recommended.
1. Click EXPORT to save a copy of the current switch configuration.
The filename for the exported file uses the convention <hostname>.cfg (example: switch.cfg). This
allows you to easily identify which switch the file was exported from.
2. When the file download is complete, the file should be shown in the bottom-left corner of your
browser (Chrome) or in the Downloads window (Firefox). Double-click the file to open it.
3. You can modify the following settings in the configuration file:
• switch host name and IP address
• information for the NTP Server, SNMP Service, Syslog Server, and VLAN, and Port
Enable/Disable
4. To import or upload the modified configuration file to the switch, click
SELECT FILE
and select the
configuration file to upload. Verify that you have selected the correct file.
5. Click IMPORT . When the upload is complete, the configuration changes are applied immediately
to the switch.
6. To view the current switch configuration, click DISPLAY CONFIGURATION IN A NEW WINDOW .
You can copy the text from this window to paste into another application or document.
Firmware Update
Use to view current firmware or to update firmware packages. Firmware can be updated using HTTP or
FTP.