Phybridge NVT PoLRE Series, User Manual

Page: 41 / 52

6 . C O M M A N D L I N E I N T E R F A C E
C o m m a n d R e f e r e n c e
37
P h y b r i d g e N V T P o L R E S w i t c h U s e r G u i d e
6. Command Line Interface
Command Reference
The following commands can be used in the command line interface in Admin > Terminal (see page 35).
Notes:
• Commands must be entered exactly as shown in the Usage column.
• <> denote single-value entries of a specific item, as explained within the brackets.
• { } denote a set or list or range of entries for a specific item.
• [ ] denote an optional entry.
• If you enter a command using incorrect syntax, the correct syntax will be shown.
•
If you enter incorrect values for a command, you will receive a message stating that the values are
not within the acceptable range.
Command Purpose Usage Usage Notes
pal Main interface
for PAL.
pal help
{cmd|short|long|configure|examine|persistent}
pal-conf-
edit
Modify user
persistent
configuration.
pal-conf-edit {show|clear}
pal-conf-edit delete<LINENUMBER>
<LINENUMBER>
is a single-value
entry of the line
number you wish
to delete.
pal-conf-
export
Export/import
persistent user
configuration
into/from
tmp/switch.cfg.
pal-conf-export {export|import}
pal-conf-
save
Save the
configuration
of the switch.
pal-conf-save
pal-
service-
http
Enable or
disable HTTP
service on the
switch.
pal-service-http {start|stop|restart|enable|disable}
pal-
service-
lldp
Enable or
disable LLDP
service on the
switch.
pal-service-lldp
{start|stop|restart|show|enable|disable}
pal-service-lldpshow {1-48|all}