Photron Revision 1.03E User Manual Download

Page: 79 / 93

4.4.5. Loop Playback Setting (PLAYBACK TYPE)

With this item you can set whether or not to playback video in a loop when playing recorded data

in MEMORY mode. Loop playback is on by default.

①

Press the remote controller's MENU key to display the menu list.

②

Select PLAYBACK TYPE from the OTHERS submenu with the remote controller's ARROW

keys.

③

The menu to select the PLAYBACK TYPE format ON/OFF is displayed on the left side of the

screen.

④

Select ON/OFF with the remote controller's

↑↓

keys.

Press the ENTER key, then the MENU key

to close the menu list. The setting is complete.

⑤

Verify the loop playback operation by playing video in MEMORY mode.

Remote Controller User’s Manual

Summary of Contents for Revision 1.03E






























































































Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands

Photron Revision 1.03E, User Manual

Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands