Photron Revision 1.03E User Manual Download Page 26

Page: 26 / 93

Chapter 3. Recording/Playback Operations

3.1. Saving Video

You can easily save video by using the remote controller.

The method differs depending on the set trigger mode.

The operations below also differ depending on the "4.4.3. Changing the Trigger Operation

(RECORDING TYPE)" setting.

•

For more details, see "4.4.3. Changing the Trigger Operation (RECORDING TYPE)".

● For the START trigger mode

①

Connect the camera body and monitor and verify that the camera is in LIVE mode.

②

Press the remote controller's REC READY key to switch to the READY state (record ready).

③

Press the remote controller's REC key to start recording.

If you record until the memory is full, the camera returns to the live state.

Summary of Contents for Revision 1.03E






























































































Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands

Photron Revision 1.03E, User Manual

Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands