Photron Revision 1.03E User Manual Download

Page: 45 / 93

■

Saving calibration settings

The black image data for correction use that was obtained by executing the calibration can be saved as

one pattern internally on the camera. The procedure for doing this is explained below.

①

Press the remote controller's MENU key to display the menu.

②

Use the remote controller's ↑↓ keys to select the CALIBRATE menu.

③

Press the remote controller's ENTER key to select the item.

④

Select the SAVE item with the remote controller's ↑↓ keys, then press the ENTER key to save.

•

The save process can take from tens of seconds to a few minutes.

■

Loading calibration settings

①

Press the remote controller's MENU key to display the menu.

②

Use the remote controller's ↑↓ keys to select the CALIBRATE menu.

③

Press the remote controller's ENTER key to select the item.

④

Select the LOAD item with the remote controller's ↑↓ keys, then press the ENTER key.

⑤

The saved black image data for correction is loaded from internal memory and the output

image reflects the correction.

Remote Controller User’s Manual

Summary of Contents for Revision 1.03E






























































































Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands

Photron Revision 1.03E, User Manual

Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands