Photron Revision 1.03E User Manual Download

Page: 22 / 93

Chapter 2. Basic Operation

2.3.4. Menu Selection/Confirmation/Cancellation

①

The menu list has a hierarchical structure made up of "menu", "submenu", and "setting"

layers, in that order.

The cursor "

►

" on the menu can be moved and the necessary menu

commands can be selected by pressing the remote controller's ARROW keys.

②

The procedure for changing a setting is explained next.

③

Select an item on the menu using the ↑↓ (up and down) keys.

④

Find the item to set in the submenu and press the → (right) key to move to the submenu. To
return to the menu from the submenu, press the ← (left) key.

⑤

Move to the item you wish to configure using the

↑↓

keys and press the ENTER key.

⑥

The configuration item will appear on the left side of the screen where the menu was

displayed. Use the ARROW keys to change the setting. To return to the submenu from the

configuration item, press the MENU key or the BACK key.

⑦

After changing the setting, complete your selection by pressing the ENTER key.

You can move the ► cursor on the left of the menu by

pressing the remote controller's

↑↓

keys.

Summary of Contents for Revision 1.03E






























































































Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands

Photron Revision 1.03E, User Manual

Search results

Summary of Contents for Revision 1.03E

Reviews:

Related manuals for Revision 1.03E

Brands by name

Popular brands