Photron FASTCAM SA-Z, Hardware Manual

Page: 23 / 119

•
Illumination/blinking in operational states

During low light mode operationLEDs other than POWER (green) and IF LINK/TRANS (red)
blink at a regular interval.

When calibration is run from USER SW or the remote controller LEDs other than POWER
(green) and IF LINK/TRANS (red) blink alternately from right to left three times and from left to
right three times.

During the Gigabit Ethernet interface initialization LEDs other than POWER (green) and IF
LINK/TRANS (red) blink alternately from right to left and from left to right a number of times.
•
For how to initialize the Gigabit Ethernet interface, refer to "4.1.7. Gigabit Ethernet Interface
Initialization", page 77.
11 FASTCAM SA-Z Hardware Manual