Photron FASTCAM SA-Z, Hardware Manual

Page: 18 / 119

Chapter. 2 Setup

FAST Drive / FAST Dock
Name Explanation
FAST Drive type 1TB Special high speed SSD Box (1TB)
FAST Drive Cable Cable for special high speed SSD Box(500mm)
FAST Dock Dock station for special high speed SSD Box
2.2. Part Names
The system is composed of components including the camera body, AC power supply, and the
"Photron FASTCAM Viewer" control software (referred to below as PFV).
For each of the system components.
- Do not expose to shock.
- Do not use in an area where flammable gas or dust present is present.
- Do not place in an unstable location such as on an unstable platform or an incline.
- Do not disassemble or modify.
- Do not expose to liquids such as water.
- Do not subject to excessive force.
2.2.1. Camera Body
The camera body contains IC memory for image recording and has been designed to be able to
record high-speed images uncompressed. The back of the camera body is equipped with the video
output terminals, which can playback the recorded images on a video monitor; the Gigabit Ethernet
interface, which permits full camera control and data download possible via connection to a PC; the
input/output connector, which allows external synchronization signals, trigger signals, IRIG time
code.
Models that do not support FAST Drive have an SD card slot on the lower part of the rear panel
while models that do support FAST Drive are equipped with a dedicated connection port.
6