FASTCAM-PCI Series Hardware Manual
1.4. Precautions
AMBIENT Temperature
Photron FASTCAM-PCI has been designed to work properly in an ambient temperature range of 0
to 35 degrees Celsius (32 to 95 degrees Fahrenheit), no condensation.
STORAGE Temperature
FASTCAM-PCI must be stored in a place with an ambient temperature range of -20 to +70
degrees Celsius (-4 to +158 degrees Fahrenheit), no condensation.
TRANSPORTATION
Save the original carton the unit came in for future transportation. Or, if you transport the unit
frequently, the use of a special carrying case is recommended. Please check with your dealer,
Photron USA or Photron Europe. Do not send the unit to a place where the temperature can go
below -20 degrees Celsius (-4 degrees Fahrenheit) or above 70 degrees Celsius (+158 degrees
Fahrenheit).
FEDERAL COMMUNICATIONS COMMISSION
STATEMENTS
WARNING: This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instruction manual, may cause interference to radio
communications. It has been tested and found to comply with the limits for a Class
鄭・
computing device pursuant to Subpart B of Part 15 of the FCC Rules and VDE 0871 Class
釘・
which are designed to provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever measures
may be required to correct the interference.
This device complies with Part 15 of the FCC Rules and VDE 0871. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received including interference that may cause undesired operation.
WARNING
This product is grounded through the power cord. This protective ground connection is essential
for safe operation of the equipment. Avoid electrical shock by plugging the power cord into a
properly wired receptacle. A loss of the protective ground, for any reason, could result in
electrical shock. Use the proper power cord and insure that it is in good condition.
- 7 -