FASTCAM-PCI Series Hardware Manual
5. V SYNC IN
6. V SYNC OUT
7. INTERNAL TRIGGER IN
8. INTERNAL TRIGGER OUT
5. V SYNC INPUT Connector (VSI Connector)
When multiple FASTCAM-PCIs are set on one single PC, sync signal between cameras is input
via this connector. It does not support external connection or synchronization. The sync signal is
+3.3 volt TTL level, negative.
6. V SYNC OUTPUT Connector (VSO Connector)
When multiple FASTCAM-PCIs are set on one single PC, sync signal between cameras is sent out
via this connector. It does not support external connection or synchronization. The sync signal is
+3.3 volt TTL level, negative.
7. INTERNAL TRIGGER INPUT Connector (TRI Connector)
In multi-camera recording operation, the trigger signal from the master camera is fed to slave
camera(s) via this connector for sync recording with the master camera.
8 INTERNAL TRIGGER OUTPUT Connector
In multi-camera recording operation, the trigger signal from the software is fed to slave camera(s)
via this connector for software-controlled sync recording with the master camera.
8. INTERNAL TRIGGER OUTPUT Connector (TRO Connector)
In multi-camera recording operation, the trigger signal from the software is fed to slave camera(s)
via this connector for software-controlled sync recording with the master camera.
- 14 -
