FASTCAM-PCI Series Hardware Manual
2.3.1. Installing the main PCI board
Follow the procedure below to install the PCI board
.
1.
Be sure to shut down the computer and unplug from the power outlet.
2.
Remove the top cover of the computer following the instructions given in the computer’s
manual.
3.
Make sure there is an empty slot for a PCI board.
4.
Remove the cover plate on the back of the computer housing corresponding to the slot where
you are going to insert the PCI board.
5.
Insert the PCI board into the slot. Press the board firmly until it completely sits in the slot.
Fasten the retaining screws on the back of the computer housing.
6.
Connect the camera cable to the PCI board. Make sure if the connector’s orientation is correct,
and fasten the retaining screws firmly. Double check if the connectors are firmly engaged and
retained.
7.
Replace the top cover of the computer and fasten retaining screws following the instructions of
the computer manual.
2.3.2. Installing the camera head
8.
Connect the connector on the camera cable to the camera connector of the PCI board.
Warning
:
Please be sure to unplug the power connector from the power outlet before installing the PCI
board in the PC.
- 16 -
