Photon Focus MV1-D2080(IE) Series, User Manual, Page: 35 / 119

e x p o s u r e n
i d l e r e a d o u t n
e x p o s u r e n + 1
f r a m e t i m e
r e a d o u t n - 1 i d l e
e x p o s u r e n - 1
Figure 4.5: Timing in free-running simultaneous readout mode (readout time< exposure time)
When the acquisition of an image needs to be synchronised to an external event, an external
trigger can be used (refer to Section 4.4). In this mode, the camera is idle until it gets a signal
to capture an image.
Figure 4.6: Timing in triggered simultaneous readout mode
4.1.2 Readout Timing
Sequential readout timing
By default, the camera is in free running mode and delivers images without any external
control signals. The sensor is operated in sequential readout mode, which means that the
sensor is read out after the exposure time. Then the sensor is reset, a new exposure starts and
the readout of the image information begins again. The data is output on the rising edge of
the pixel clock. The signals
FRAME_VALID
(
FVAL
) and
LINE_VALID
(
LVAL
) mask valid image
information. The signal
SHUTTER
indicates the active exposure period of the sensor and is shown
for clarity only.
4.1 Image Acquisition 33