7.1.5
Characteristics
This tab contains LinLog and Skimming settings.
Figure 7.7: MV-D1024E-3D01-160 characteristics panel
LinLog
The LinLog technology from Photonfocus allows a logarithmic compression of high light
intensities. In contrast to the classical non-integrating logarithmic pixel, the LinLog pixel is an
integrating pixel with global shutter and the possibility to control the transition between
linear and logarithmic mode (Section 4.3.2). There are 3 predefined LinLog settings available.
Alternatively, custom settings can be defined in the
User defined
Mode.
LinLog Mode:
Off: LinLog is disabled. Low/Normal/High compression: Three LinLog
presettings. User defined:
Value1
,
Time1
,
Value2
and
Time2
. The Linlog times are per
thousand of the exposure time. Time 800 means 80% of the exposure time.
Skimming
Skimming is a Photonfocus proprietary technology to enhance detail in dark areas of an image.
Skimming:
Skimming value. If 0, Skimming is disabled. See Section 4.3.3.
Black Level Offset
It may be necessary to adjust the black level offset of the camera.
Black Level Offset:
Black level offset value. Use this to adjust the black level.
Simultaneous readout (Interleave)
The simultaneous readout mode allows higher frame rate.
Simultaneous readout (Interleave):
Enable the simultaneous readout mode.
Combination of property
Trigger.Interleave
and property
Skim
is not avail-
able!
Combination of property
Trigger.Interleave
and property
Trig-
ger.LevelControlled
is not available!
7.1 MV-D1024E-3D01-160
77
Summary of Contents for MV-D1024E-3D01-160
