Photon Focus CameraLink MV1-D1280, User Manual

Page: 62 / 83

8 Graphical User Interface (GUI)
Flip- & Mirror-Image is not available in colour camera models.
Decimation
Decimation reduces the number of pixels in y-direction. Decimation can also be used together
with a ROI or MROI. Decimation in y-direction transfers every n-th row only and directly results
in reduced read-out time and higher frame rate respectively.
Decimation X: Decimation value for x-direction. Example: Value = 3 reads every third column
only.
Decimation Y: Decimation value for y-direction. Example: Value = 3 reads every third row only.
Crosshairs
Crosshairs is a cross inside the image. The crosshairs value is overlapped the original image
data. The position of the crosshairs can be configured. The unit of the grey value is always 12
bit.
Enable Crosshairs: Enable crosshairs.
X: Vertical line position of crosshairs.
Y: Horizontal line position of crosshairs
Value [12bit]: Crosshairs grey value in 12bit.
Crosshairs is only available when Decimation X and Decimation Y is set to 1 and
Binning is disabled.
Settings for frame grabber
Shows the ROI settings on the camera interface. Use these settings to configure the frame
grabber.
Wtot: Number of pixels in a line (Width of the image).
Htot: Number of lines out of the camera (Height of the image).
Update: Update values of Wtot and Htot.
60