Photon Focus CameraLink MV1-D1280, User Manual

Page: 58 / 83

7 The PFRemote Control Tool
7.5.3 Main Buttons
The buttons on the right side of the configuration dialog store and reset the camera
configuration.
Figure 7.3: Main buttons
Reset:
Reset the camera and load the default configuration.
Store as defaults:
Store the current configuration in the camera flash memory as the default
configuration. After a reset, the camera will load this configuration by default.
Settings file - File Load:
Load a stored configuration from a file.
Settings file - File Save: Save current configuration to a file.
Factory Reset: Reset camera and reset the configuration to the factory defaults.
7.6 Device Properties
Cameras or sensor devices are generally addressed as ’device’ in this software. These devices
have properties that are accessed by a property name. These property names are translated
into register accesses on the driver DLL. The property names are reflected in the GUI as far as
practicable. A property name normally has a special mark up throughout this document, for
example:
ExposureTime
. Some properties are grouped into a structure whose member is
accessed via dot notation, e.g.
Window.X
(for the start X value of a region of interest). When
changing a property, the property name can always be seen in the log window of the main
program window.
56