Storage
Requirements
Store the CoolSNAP camera system in its original containers. To protect the
system from excessive heat, cold, and moisture, store at an ambient
temperature between 0°C and 70°C with a relative humidity of 0%-80%
noncondensing.
Microscopes,
Lenses, and
Tripods
The camera has a standard threaded video mount and can be mounted to any
microscope that accepts a standard C-mount adapter. The camera also allows
you to install any lens that is compatible with a standard threaded video
mount as long as its optics do not extend farther than .47 inches (11.9 mm)
behind the flange of the lens. The CoolSNAP camera can be mounted to a
tripod using the tripod-mounting hole located on the bottom of the camera.
See
Additional Measurements
on page 16 for more information.
Note: In microscopy applications, a 0.5x C-mount camera coupler is recommended for an
expanded field of view.
Repairs
The CoolSNAP camera system contains no user-serviceable parts. Repairs
must be done by Roper Scientific. Should your camera system need repair,
contact Roper Scientific Customer Service. Please save the original packing
materials so you can safely ship the camera system to another location or
return it for repairs if necessary.
Note: Do not open the camera. Opening the CoolSNAP camera voids the warranty.
Cleaning
Clean exterior surfaces of the camera with a dry, lint-free cloth. To remove
stains, contact Roper Scientific Customer Service.
To clean the camera’s imaging window, use only a filtered compressed-air
source. Do not touch the window.
Chapter 1. Introduction
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
