Phonowind Phono W-1.0, Owner'S Manual

Page: 35 / 46

31
Starting: On-gird
1) Make sure finishing installation according to above procedures and any parts of
wind driven generator in good condition.
2) Switch on controller, pon power on, then the controller Display starts to work,
displaying"stop" , if not, please check Gird and wiring.
3) After 30 seconds, turn BRAKE right at ‘Normal’, push up Wind turbine at ‘Normal’,
wind driven generator will start to work. If now Wind speed≥2.5m/s, system will
start to generate electricity.
Notice:
When wind driven generator first starts after installation, suggests run
system at wind speed ≤5m/s
Shut Down
When wind speed ≤10m/s, press BRAKE switch at ‘Brake’, then controller Display will
display voltage reduce to’ LOCK’, then push up Wind turbine at ‘STOP’, wind turbine will
stop working.
Check turbine
status
Switch on
controller
Turn "Brake" to
Normal status
Starting Up Process
Check outside
wind speed
Press STOP
button
Shut Down Process
Turn "Brake" to
Brake status
Press STOP
button
Emergency shut Down Process
Turn "Brake" to
Brake status