background image

PCL2700 / PCL4700

2

English     

COMPRESSOR

6. Threshold Control

This control will adjust the compressor ’s threshold between -40 
and +20 dB.

7. Indicators (PCL2700 only)

if the signal is below the value set by the threshold control, the 
LeD on the left will light up. if the signal is

above the adjusted value, the LeD on the right will. The center 
yellow  LeD  refers  to  the  interactive  Knee  soft-knee  range  (if 
activated).

8. Sidechain External Button (PCL2700 only)

Pushing this button in will interrupt the signal between the input and 
the compressor. When this is done, using the SC return input on 
the rear of the device to connect an external control signal.

9. Sidechain Monitor Button (PCL2700 only)

By pushing this button, the input signal from the sidechain will be 
linked to the audio output, thus muting the audio input signal. When 
the SC Monitor switch is activated, only the sidechain signal will be 

sent to the outputs, which will be indicated by a flashing LED.

10. Ratio Control

This control will adjust the ratio of input to output, with regards to 
all signals that exceed the threshold by 10Db or more. The auto 
hard-knee/soft-knee function ensures level, inaudible activation 
of the compressor function.

11. Gain Reduction Display

This 8 digit display (6 digit on the PCL4700) gives you a visual 
representation of the gain reduction currently applied to your signal 
(between 1 and 0 dB).

12. Attack Control (PCL2700 only)

This control will allow users to determine when compression will 
set in after the signal level has exceeded the threshold.

13. Interactive Knee Button

This  button  will  activate  the  “interactive  knee”  function.  When 
active,  input  signals  that  are  10dB  over  the  threshold  will  be 
processed with ‘soft-knee’ compression. at all other times, hard-
knee  compression  will  be  active.  The  interactive  knee  function 
allows  for  more  discreet  compression  of  music  and  should  be 
activated when inaudible compression is needed.

14. Auto Button (PCL2700 only)

By pushing this button in, the attack and release buttons on the 
PCL2700 will become effectively disabled. The attack and release 
times  will  then  be  determined  automatically,  according  to  the 
complexity of musical aspects of the audio received.

15. Release Control (PCL2700 only)

By adjusting this control, users can select the time it will take for 
the compressor to disengage after the gain drops below the level 
set by the threshold. Users can adjust the range between 0.05 
and 5 seconds.

16. Output Control

This  control  allows  users  to  increase  and  attenuate  the  output 
signal of the PCL by up to 20 dB, ensuring users can compensate 
for any gain loss caused by compression.

17. Level Meter

This 6-segment (5-segment on the PCL4700) level meter gives 
users a visual indication of the incoming and outgoing audio levels 
between -0 and +18 dB (-24 and +18 on the PCL4700), depending 
on the setting of the Level Meter input/output Button.

18. Level Meter Input/Output Button

This button allows the user to decide whether they want to see 
the input level (when the button is engaged) or the output level 
(when the button is disengaged) in the level meter.

19. In/Out Switch

This button activates the corresponding channel. it also activates a 
“hard bypass” of the corresponding channel, meaning that – even 
without power – the input signal will be sent directly to the output. 
a common function of this button is to compare the processed and 
unprocessed signals instantly.

DE-ESSER SECTION (PCL2700 only)

The De-esser function – available on the PCL2700 – is only active 
if the compressor function is used.

20. Level Control

adjusting this control will allow users to determine the amount of 
frequency suppression to be used.

21. De-esser Level Meter

This meter gives a visual representation of the current attenuation, 
b and +12 dB.

22. Male Switch

The button will adapt the de-esser function to both male (pushed 
in) and female (released) voices.

23. In/Out Switch

This button will turn the de-esser function off and on.

PCL2700

PCL4700

6

8 10

12 14 15

16 19 20 2

7

11

9

1

18

22

17

21

2

6

5

19

10

16

4

11

17

1

18

Summary of Contents for PCL 2700





















Reviews: