6
English
Deutsch
Español
Français Português
日本語
简体中文
AM120MKIII / AM220 / AM220P
AM120MKIII / AM220 / AM220P
AM120MKIII / AM220 / AM220P
AM120MKIII / AM220 / AM220P
USB Player (AM220P only)
The USB Player’s signal is sent
directly to the channel 5/6 mix, and
can be affected by its level control,
EQ and EFX sends. It is possible to
use an input source in the XLR or
1/4” connectors of the input while
the USB player is in use, however
it’s important to note that the two
signals’ levels cannot be controlled
separately in this instance. Playback
of WAV and MP with bit rates of up
to 20 kilobits per second is possible.
27. USB Slot
Connect your USB flash drive to this input. Once a drive
is connected, the files will initiate and the first track will
appear paused on screen.
28. Display
This -digit display will display the track number currently
being played. It also offers play and pause indicators to
the left of the display. Before playback occurs, the screen
will also indicate the type of file type the unit is currently
playing: WAV or MP.
29. Back/Next Buttons
Pushing these buttons will allow users to skip back and
forwards between tracks in sequence. Please note that
these buttons cannot be held down to fast-forward/rewind
through tracks.
30. Play/Pause Button
Push this button to start and pause playback of the cur-
rently displayed track. Starting a track after it is paused will
resume the track from the point at which it was paused.
Pushing and holding this button will revert back to the first
track on the USB memory stick.
27
28
29 0
