Phonetics Sensaphone ISACC, Operator'S Manual

Page: 64 / 143

64
Sensaphone ® ISACC Instruction Manual
OUT12 = "Analog output #2" = MAN, 000 >
OUT13 = "Analog output #3" = MAN, 000 >
OUT14 = "Analog output #4" = MAN, 000 >
ONAME
This keyword command allows you to assign a descriptive name to an output.
To display the label name for each output, type the command
show oname
at an ISACC
prompt. You may also display a specific output name by typing show oname followed by the
output number.
ISACC> show oname
OUTPUT LABEL NAMES
OUT01 = "Output #1 "
OUT02 = "Output #2 "
OUT03 = "Output #3 "
OUT04 = "Output #4 "
OUT05 = "Output #5 "
OUT06 = "Output #6 "
OUT07 = "Output #7 "
OUT08 = "Output #8 "
OUT09 = "On board buzzer "
OUT10 = "On board relay "
OUT11 = "Analog output #1"
OUT12 = "Analog output #2"
OUT13 = "Analog output #3"
OUT14 = "Analog output #4"
To assign a descriptive name to an output, type set output after an ISACC prompt. Press
ENTER to go to the next parameter. You may also program a specific output name by typing
set oname followed by the output number.
ISACC> set oname
OUTPUT LABEL NAMES
OUT01 = "Output #1 " > WATER PUMP RELAY
OUT02 = "Output #2 " > LOW WELL LIGHT
OUT03 = "Output #3 " > HI SUMP LIGHT
OUT04 = "Output #4 " >
OUT05 = "Output #5 " >
OUT06 = "Output #6 " >
OUT07 = "Output #7 " >
OUT08 = "Output #8 " >
OUT09 = "On board buzzer " >
OUT10 = "On board relay " >
OUT11 = "Analog output #1" > CONTROL VALVE
OUT12 = "Analog output #2" >
OUT13 = "Analog output #3" >
OUT14 = "Analog output #4" >