Phonetics Sensaphone ISACC, Operator'S Manual

Page: 63 / 143

63
Chapter 7: Programming
IN10 = "Input #10 " = Yes (Y or N) > N
IN11 = "Input #11 " = Yes (Y or N) >
IN12 = "Input #12 " = Yes (Y or N) > N
IN13 = "Input #13 " = Yes (Y or N) >
IN14 = "Input #14 " = Yes (Y or N) >
IN15 = "Input #15 " = Yes (Y or N) >
IN16 = "Input #16 " = Yes (Y or N) >
OUTPUTS
ISACC has 8 digital outputs, 1 on-board relay, 1 on-board buzzer, 4 analog outputs. The
outputs can be controlled manually, or can be controlled automatically by a C program. This
keyword command allows you to manually turn the output on or off, or to set the output to
be automatically controlled by C program. For the analog outputs, you may enter a value from
0 to 255 to manually set the output level, or set the output to be controlled automatically by C
program.
To display the output name, configuration and status, type
show outputs
after an ISACC
prompt. You may also display the information for a specific output by typing show outputs
followed by the output number.
ISACC> show outputs
OUTPUTS
OUT01 = "WATER PUMP RELAY" = MAN, OFF
OUT02 = "LOW WELL LIGHT " = MAN, OFF
OUT03 = "HI SUMP LIGHT " = MAN, OFF
OUT04 = "Output #4 " = MAN, OFF
OUT05 = "Output #5 " = MAN, OFF
OUT06 = "Output #6 " = MAN, OFF
OUT07 = "Output #7 " = MAN, OFF
OUT08 = "Output #8 " = MAN, OFF
OUT09 = "On board buzzer " = MAN, OFF
OUT10 = "On board relay " = MAN, OFF
OUT11 = "CONTROL VALVE " = MAN, 000
OUT12 = "Analog output #2" = MAN, 000
OUT13 = "Analog output #3" = MAN, 000
OUT14 = "Analog output #4" = MAN, 000
To program or switch the outputs, type
set outputs
after an ISACC prompt. Enter a value
and press ENTER to go to the next parameter. You may also program or switch a specific
output by typing
set outputs followed by the output number.
ISACC> set outputs
OUTPUTS
0 = OFF, 1 = ON, A = AUTO
OUT01 = "WATER PUMP RELAY" = MAN, OFF > A
OUT02 = "LOW WELL LIGHT " = MAN, OFF > A
OUT03 = "HI SUMP LIGHT " = MAN, OFF > A
OUT04 = "Output #4 " = MAN, OFF > 1
OUT05 = "Output #5 " = MAN, OFF >
OUT06 = "Output #6 " = MAN, OFF > 1
OUT07 = "Output #7 " = MAN, OFF >
OUT08 = "Output #8 " = MAN, OFF >
OUT09 = "On board buzzer " = MAN, OFF >
OUT10 = "On board relay " = MAN, OFF >
OUT11 = "CONTROL VALVE " = MAN, 000 >