Phonetics Sensaphone 800, User Manual

Page: 101 / 136

Call Delay:
Expired
Intercall Time:
Activated
Voice Repetitions:
Activated
Call Progress:
Activated
Max Calls:
Activated
Alarm Messages:
By Telephone
and
On site
Chapter 7: Operation
98
III. Dial-out Begins Variable Factors
• The dial-out process is activated as soon
as the Call Delay time expires (if the
alarm has not been cancelled at the Model
800’s installation site.) The dial-out begins
with telephone number 1 and proceeds
sequentially, through the remaining
telephone numbers.
• If the alarm is not acknowledged with the
first dial-out telephone call, the Model
800 waits the duration of Intercall Time
before dialing the next telephone number.
Intercall Time is the programmed waiting
period in between each dial-out telephone
call.
• When the telephone is answered, the
programmed Voice Repetitions determine
the number of times per call the Model
800 recites the alarm message.
• Call Progress, an automatic feature,
enables the Model 800 to detect whether
or not the telephone call is answered. After
10 rings, or if a busy signal is encountered,
the Model 800 will hang up, wait the
programmed Intercall Time, and proceed
to dial the next telephone number.
• If no telephone calls are answered, the
Model 800 dials out sequentially, through
the remaining telephone numbers and
continues to cycle until the programmed
Maximum Number of Calls is reached.
• When the telephone is answered, the
Model 800 will immediately begin reciting
a message that indicates which of the
zones is in alarm. At the same time, the
alarm message is repeating at the Model
800’s installation site. The Model 800 will
request acknowledgment, if it has not yet
occurred.