Unity Telephone User Guide
10
Speaker Volume
During a call using the Speaker, pressing the volume bar adjusts the Speaker volume louder and softer.
Ringer Volume
Message Waiting Indicators
If you receive a text message or a new voice mail message on your cell phone while it is connected to the Unity
base unit or a voice mail message from your service connected to Line One, a Message Waiting prompt will appear
on the LCD screen and the red LED at the top of the Unity will flash. Listening to the message from the Unity will
cause the Message Waiting indicator to turn off if dialed from the Messages Sub-Menu. Disconnecting your cell
phone from the Unity will also cause the Message Waiting indicators to be turned off if the message was from your
cellular service. If the message is a text message, “Text Msg” will appear on a Soft Key; press to view the message.
Call Handling
Live Call Transfer
Transferring a call from the Unity to the cell phone:
You may also detach your cell phone from the Unity during a call and continue the call on your cell
phone at any time by pressing the BT Off Soft Key located at the bottom left side of the LCD screen.
If you are using the Bluetooth Module, you can also disconnect it from the Unity to transfer the call to the cell phone.
Voice Dialing
When not on a call, pressing the volume bar adjusts the ringer volume louder, softer, or off. When the ringer
is OFF, an icon is displayed on the idle screen in place of the banner.
When a Dock-N-Talk accessory is plugged into the Unity accessory port, you can use the “Do Not Disturb” to
prevent extension telephones from ringing. Pressing the Volume Down key while the Ringer is off puts the Unity
in Do Not Disturb mode. When the ringer is turned off or the Unity has been put into Do Not Disturb mode,
the Ringer OFF icon is displayed on the idle screen in place of the Banner.
Placing a call from your cell phone:
If you wish to dial a call first from your cell phone while it is docked to the Unity telephone, you can
then immediately transfer the call onto the Unity telephone by picking up the handset or pressing Cell Line to
connect the call using the Speaker.
Transferring an active call from your cell phone to the Unity:
If you are on a call with your cell phone, you can transfer the call to the Unity if your cell phone supports this feature.
Connect the cell phone to the Unity base unit during the call (if using a cable) and you can continue the call on the
Unity handset or speakerphone. Some cell phones may require that you press ## to connect the call. If you are using
a Bluetooth Module, when you come into range the call will be transferred to the Unity if your cell phone supports
this feature.
To use the voice dialing feature of your cell phone, press the Cell Line key and hold it down until the dialing tone
goes away. You will then hear a tone or a voice prompt from the cell phone. Say the command or name you desire
and the call will be connected. This feature works only with cellular handsets that support voice dialing from
remote devices.
