13
12
Turning iCube ON/OFF
Turning iCube ON
To turn ON your iCube, press and hold the ON/OFF
button for about a second until you see the battery
indicator turn ON. Once your iCube is fully operational,
the battery indicator will flash slowly.
Turning iCube OFF
To turn OFF your iCube, press and hold the ON/OFF
button for about two seconds until you see the battery
indicator turn ON. Release the ON/OFF button. Once
you release the ON/OFF button, the battery indicator
will go dark and your iCube is OFF.
햲
햳
Getting started
Connecting iCube to your computer
iCube was designed to bring you the benefits of
CableFree Fitting via Bluetooth connection. However,
there are locations where Bluetooth connections are
not allowed, so iCube can alternatively be used with a
USB connection. In either case, before you can start
using your iCube it needs to be connected with your
computer.
Before you continue, make sure the iCube battery
charge is high.
Connecting via Bluetooth
Connecting your iCube via Bluetooth is done in three
steps:
1. Prepare the Bluetooth connection on your computer
To use iCube wireless via Bluetooth make sure that you
have Bluetooth activated. If your computer is equipped
with Bluetooth built in, find the Bluetooth settings
and activate it. For specific instructions please refer to
the documentation of the computer and operating
system you are using.
GA_iCube_GB._AK1_9.10.07.qxp 24.1.2008 14:27 Uhr Seite 12
